Rebuilding the system with new eTPU functions

Discussion to talk about software related topics only.
Post Reply
v8dave
Posts: 333
Joined: Thu Dec 31, 2009 8:31 pm

Rebuilding the system with new eTPU functions

Post by v8dave »

Hi all,

I have worked out that the Quadrature is not actually built into my standard setup so I have used the code generator on the Freescale website to create an eTPU configuration that matches my setup. I have copied the neccessary files to the eTPU directory, making sure I add any Netburner code that is needed (compared to the old files)

I then did a rebuild all system files command from the NBEclipse menu option and the main NB library(MOD5234.a and DBMOD5234.a) shows a rebuild as the date has changed.

I still can't get Quadrature to work even though I have done the above!

Anyone successfully for QD to work?

Cheers,
Dave...
v8dave
Posts: 333
Joined: Thu Dec 31, 2009 8:31 pm

Re: Rebuilding the system with new eTPU functions

Post by v8dave »

Got it partly working. I closed and re-opened the project, did a clean and then rebuild and now it works.

Not getting increment or decrement in exact counts as sometimes jumps but at least it works and I can play around with the settings to get it better.

Dave...
Post Reply