Page 1 of 2
Wi-Fi module Update
Posted: Fri Apr 25, 2008 1:06 pm
by seulater
So what's the news on the Wi-Fi module ?
Will it be ready this year ?
Re: Wi-Fi module Update
Posted: Tue Apr 29, 2008 9:56 am
by NetBurnerGroup
Hi,
The wifi module is still in FCC testing. We will know more in a few weeks.
Re: Wi-Fi module Update
Posted: Tue Apr 29, 2008 9:59 am
by seulater
any spy photos ?
Re: Wi-Fi module Update
Posted: Mon May 12, 2008 8:19 am
by pbreed
Wifi Update....
The FCC testing for an intentional radiator takes about three weeks.
We failed the 2nd harmonic radiated emmsions test. (comming off the module not out the antenna.
Two board spins later we passed that test on Thursday of last week with 9 Db of margin.
So now we need to rerun the entire test sequence on the new board.
I'm currently waiting for an e-mail from the testing facility as to when we can restart.
and what*, if anything) of what we have already done can be reused.
Paul
Re: Wi-Fi module Update
Posted: Mon May 12, 2008 8:23 am
by seulater
Thanks for the update and very sorry to hear that. Did you guys put and RF shield around all the components ?
Re: Wi-Fi module Update
Posted: Tue May 13, 2008 3:39 pm
by lgitlitz
The majority of the components have been covered by a shield for both tests. This is a FCC requirement to qualify module type wireless devices.
-Larry
Re: Wi-Fi module Update
Posted: Tue May 13, 2008 4:14 pm
by seulater
Really, I thought that when you shield it nothing gets out.
Re: Wi-Fi module Update
Posted: Thu May 22, 2008 5:55 am
by kevin_d_mccall
RF will find a way!
I had one design where a swage pin fitted to tune the processor crystal frequency at ICT was acting like an antenna, to pass emission testing it had to be removed and a test pad added instead.
Re: Wi-Fi module Update
Posted: Thu Jun 12, 2008 6:56 pm
by seulater
How about an updateski...
Re: Wi-Fi module Update
Posted: Mon Jun 23, 2008 7:27 am
by seulater
Any News yet ?