Using other UARTS for PPP and modem connection
Posted: Mon Mar 08, 2010 9:43 pm
I see from the software that there is a choice to set the UART for the PPP connection to any one of the 3 built in com ports.
I was wondering if it is possible to use an eTPU serial port for a PPP connection?
At present I am testing with UART2 but I need to support a second modem on another com port and the only one I have available is via the eTPU. I will dig into the software and see if this is possible to do. I may have to rewrite the code to do this but that is no issue, I just need to know it can be done or if someone has already done this.
Dave...
I was wondering if it is possible to use an eTPU serial port for a PPP connection?
At present I am testing with UART2 but I need to support a second modem on another com port and the only one I have available is via the eTPU. I will dig into the software and see if this is possible to do. I may have to rewrite the code to do this but that is no issue, I just need to know it can be done or if someone has already done this.
Dave...