MODM7AE70 - uart max baudrate

[rogerio.c.labanca]

Hi all,

I want to know the maximum baudrate that I can configure using the MODM7AE70 serial ports.

Thanks

[pbreed]

Not as simple a question as one might like.
The baud system can divide by 8 or 16 and have a fractional component.

CPU Clock is 300MHZ.
The Perif_clock is also 300Mhz.

The baud rate setting code is in:
nburn\arch\cortex-m7\cpu\SAME70\source\serial.cpp

So I think the baud can be set as high as 37.5 M baud.

(Perif_clock / 8)
What baudrate do you want?

Better question is I want baudrate XX what is the error at that rate?

[Ushavilash]

The maximum baud rate for the MODM7AE70 serial ports depends on specific hardware configurations and firmware settings.

[TomNB]

Are you saying you do not know what specific baud rates you need? Or the maximum?

[TomNB]

Hi Rogerio,

Just checking back to see if you have an idea of the baud rates you need.

Thanks!