Page 1 of 1
NANO54415 mechanical drawing
Posted: Fri Jun 01, 2012 10:00 pm
by seulater
Now that these are shipping, where can we find the mechanical drawings at ?
Also, where is a good source for getting the hardware latch to hold the board down, and mini-pci connector.
Re: NANO54415 mechanical drawing
Posted: Sun Jun 03, 2012 9:53 pm
by pbreed
the part numbers for the latch and connector are on the silkscreen for the carrier board....
Digikey part numbers WM3294CT-ND for latch
WM3471CT-ND for the connector....
As far as mechanicals... the mini pci express min is the board form factor....
Start at page 29 of this PDF... page 33 has the drawing...
http://www.pcisig.com/developers/main/t ... fd0f3c8feb
We don't have mechanicals yet.. I can send gerbers, dxf, or altium files for the PCB...
Re: NANO54415 mechanical drawing
Posted: Wed Jun 06, 2012 6:47 am
by v8dave
Hi Paul,
I see you from your reply above that you use Altium Designer.
Do you by any chance use the 3D features of this software?
I would be interested in a 3D Step file of the MOD54415 is this was available. It would save me creating my own within my 3D CAD software like I did with the MOD5234.
I use Altium myself and I could then import the 3D file to the footprint for the MOD54415.
Cheers
Dave...
Re: NANO54415 mechanical drawing
Posted: Tue Jun 19, 2012 11:22 am
by khoney
Like Dave, I too would be interested in it (but for the Nano, not the MOD) - it would save us some package design time.
Re: NANO54415 mechanical drawing
Posted: Tue Jun 19, 2012 1:31 pm
by pbreed
We presently don't have good 3D modeling with Altium...
What gets generated is attached...