NANO54415 mechanical drawing

[seulater]

Now that these are shipping, where can we find the mechanical drawings at ?
Also, where is a good source for getting the hardware latch to hold the board down, and mini-pci connector.

[pbreed]

the part numbers for the latch and connector are on the silkscreen for the carrier board....

Digikey part numbers WM3294CT-ND for latch
WM3471CT-ND for the connector....

As far as mechanicals... the mini pci express min is the board form factor....
Start at page 29 of this PDF... page 33 has the drawing...

http://www.pcisig.com/developers/main/t ... fd0f3c8feb

We don't have mechanicals yet.. I can send gerbers, dxf, or altium files for the PCB...

[v8dave]

Hi Paul,

I see you from your reply above that you use Altium Designer.

Do you by any chance use the 3D features of this software?

I would be interested in a 3D Step file of the MOD54415 is this was available. It would save me creating my own within my 3D CAD software like I did with the MOD5234.

I use Altium myself and I could then import the 3D file to the footprint for the MOD54415.

Cheers
Dave...

[khoney]

Like Dave, I too would be interested in it (but for the Nano, not the MOD) - it would save us some package design time.

[pbreed]

We presently don't have good 3D modeling with Altium...
What gets generated is attached...