Can write/read to PINK, but cannot see on network

Community forum for discussion and support of the PINK product and development kit
Ridgeglider
Posts: 513
Joined: Sat Apr 26, 2008 7:14 am

Re: Can write/read to PINK, but cannot see on network

Post by Ridgeglider »

ipset will find all the NBs. They are listed in the "select a unit" right hand window. The ones configured for DHCP say so, but also list the assigned IP. In the screen shot below, notice that 2 NBs are DHCP
'd. Select the one you want to configure, edit the "NDK Settings" then click "Set->"
Attachments
ipsetup.png
ipsetup.png (22.98 KiB) Viewed 5837 times
User avatar
tod
Posts: 587
Joined: Sat Apr 26, 2008 8:27 am
Location: Southern California
Contact:

Re: Can write/read to PINK, but cannot see on network

Post by tod »

It could be the unit's flaky but it sounds equally probable that you could have a suspect cable (assuming you were using the same blue cable for all these tests).
Post Reply