I need to set up one of the etpu uart ports for 8 data bits, no parity, and 1 stop bit. The function:
int eTPUFDUartOpen(int RXchannel,
int baud_rate = 115200,
int bits_per_data_word = 8,
int parity = FS_ETPU_UART_NO_PARITY,
int priority = FS_ETPU_PRIORITY_MIDDLE);
does not seem to have the typical uart stop bit configuration options. Is this possible, or are the etpu channels fixed at two stop bits as the only option?
Discussion to talk about software related topics only.
1 post • Page 1 of 1