MODM7AE70 Canbus
MODM7AE70 Canbus
I've recently started working with the MODM7AE70 and I would like to use the CAN bus functionality to interface with external components. I'm not able to find a single reference to any CAN bus code in the examples folder, nor can I find the canif.h I see referenced in some threads here on the forum. Is there a driver available for using CANbus on the MODM7AE70, has anybody been successful in getting this working?
Re: MODM7AE70 Canbus
If you do not see an example that you are looking for, please contact NetBurner support directly. They may have examples that are not published.
Re: MODM7AE70 Canbus
I am also confused. After reading this article on your blog I also got the impression, that CAN is ready to use on your modules:
https://www.netburner.com/learn/the-can ... n-can-you/
So what is the current situation? How about reference designs with CAN transceivers?
Thanks,
Anguel
https://www.netburner.com/learn/the-can ... n-can-you/
So what is the current situation? How about reference designs with CAN transceivers?
Thanks,
Anguel
Re: MODM7AE70 Canbus
Pretty much any can tranceiver will work...
CAN TX, CAN RX power and ground, four wires...
Try searching for a SN65HVD230
I found one on a break out board form Amazon....
Just 4 wires.
The MODM7 has a CAN examples in the latest 3.X releases...
CAN TX, CAN RX power and ground, four wires...
Try searching for a SN65HVD230
I found one on a break out board form Amazon....
Just 4 wires.
The MODM7 has a CAN examples in the latest 3.X releases...
Re: MODM7AE70 Canbus
Hm, I have the 3.1 and don't find anything about CAN, now I looked at the 3.3 files and don't see anything CAN related there:
https://www.netburner.com/NBDocs/Develo ... files.html
Thanks for the info about the transceivers.
https://www.netburner.com/NBDocs/Develo ... files.html
Thanks for the info about the transceivers.
Re: MODM7AE70 Canbus
nburn\examples\\PlatformSpecific\MODM7AE70\CanExample
Re: MODM7AE70 Canbus
Thanks Paul! I found it in the new v3.3 release.