Page 1 of 1

Set slave to nack

Posted: Fri Jun 16, 2017 4:01 pm
by tk1390
Is there any way to disable the ACK of the slave (multi) module without disabling the slave peripheral? Thanks!

Re: Set slave to nack

Posted: Sat Jun 17, 2017 5:02 am
by pbreed
What protocol? Can/I2C?

What hardware?

Re: Set slave to nack

Posted: Wed Jun 28, 2017 11:49 am
by tk1390
Sorry I2C on the MOD5234. I eventually found a work around by changing the address to an unused address.