Installing v2.8.4

Discussion to talk about software related topics only.
Post Reply
SeeCwriter
Posts: 606
Joined: Mon May 12, 2008 10:55 am

Installing v2.8.4

Post by SeeCwriter »

FYI...When I installed v2.8.4 I had to rebuild the system for SNMP, which is all normal. But when I rebuilt the system none of libraries under \nburn\system were rebuilt. I had to manually go to each subdirectory and run make. I've not had to do that before.
User avatar
Forrest
Posts: 283
Joined: Wed Apr 23, 2008 10:05 am

Re: Installing v2.8.4

Post by Forrest »

Can you clarify your rebuild process? I assume you are using the command line. Do you build from your project directory, or go to the system libraries and rebuild each individually. If you have a log, that would be perfect.
Forrest Stanley
Project Engineer
NetBurner, Inc

NetBurner Learn Articles: http://www.netburner.com/learn
SeeCwriter
Posts: 606
Joined: Mon May 12, 2008 10:55 am

Re: Installing v2.8.4

Post by SeeCwriter »

I open a command prompt at the \nburn\system directory, type "make clean", then "make". Then I move to each system directory of the modules we use and do the same. For all the previous versions that all I've done.
Post Reply