Debug error "Interrupt failed"

Topics for the Eclipse Environment
Post Reply
gdecaussin
Posts: 5
Joined: Mon Oct 02, 2017 1:58 pm

Debug error "Interrupt failed"

Post by gdecaussin »

Currently using IDE 3.2.0. I start debugging, it loads application, but then when I try to pause the run it craps out and gives "Interrupt Failed" error.

The debug is very fussy. Not sure if it is me, my setup or the IDE.

I am using a laptop (no Ethernet port) via WiFi and the MODM7AE70 module connected by wire to network, is that a problem?

Breakpoints will work, but it takes several times of reloading to get it to work. It is just so inconsistent.

Anyone else having this problem?
Post Reply