Page 1 of 1

SBL2e Ethernet to 8 TTL OUTPUTS

Posted: Tue May 10, 2022 6:04 am
by JoshToolz
Hi,
I need Ethernet to 8 TTL OUTPUTS. I do not need comport. It looks like the SBL2e will do it, if so what would be involved in achieving this? Do I have to burn in custom code? Or can I just send some configuration commands to an ethernet port?

Re: SBL2e Ethernet to 8 TTL OUTPUTS

Posted: Tue May 10, 2022 1:32 pm
by TomNB
Hello,

What electrical specs do you need to meet? Voltage, source/sink current amount?
At what speed do you need to switch the outputs?

The SBL2e can do what you ask without programming at 3.3V. Either through the web server or a tcp connection.

Re: SBL2e Ethernet to 8 TTL OUTPUTS

Posted: Tue May 10, 2022 1:33 pm
by TomNB
I would recommend checking the manual as well: https://www.netburner.com/download/sbl2 ... rs-manual/

Re: SBL2e Ethernet to 8 TTL OUTPUTS

Posted: Wed May 11, 2022 6:13 am
by JoshToolz
3.3v TTL is fine and they will only change state every few minutes. Thanks for your fast reply.