NetBurner with gigabit LAN-Interface

Discussion to talk about hardware related topics only.
User avatar
Posts: 943
Joined: Thu Apr 24, 2008 3:58 pm

Re: NetBurner with gigabit LAN-Interface

Post by pbreed » Thu Apr 01, 2021 9:39 pm

If we gave you a PCIE lane, do you have a connector you like for that?

Posts: 3
Joined: Fri Mar 19, 2021 2:44 pm

Re: NetBurner with gigabit LAN-Interface

Post by corestar » Fri Apr 02, 2021 2:08 pm

SOM's with PCIe often use an edge connector with PCIe lanes as well as other things (ie GPIO, SPI etc). That would work well but tends to limit how many signals are available. There are of course other possibilities. We would prefer not have any cabling from the SOM to our baseboard.

Note that we would need the Netburner to be the root complex in order to talk to an FPGA which would be an endpoint. Many SOM's assume it will be the other way around with the SOM being inserted as a PCIe endpoint in say a computer.

Post Reply