PK70 EX NPT looping

Discussion to talk about hardware related topics only.
tgarvin
Posts: 8
Joined: Wed Nov 21, 2018 4:53 pm

Re: PK70 EX NPT looping

Post by tgarvin » Thu Dec 06, 2018 11:29 am

Tom. Not able to get to a prompt. It's stuck in a loop and I cannot break it.

This is what I'm seeing.

========================================================

Trap occured
Vector=05FMT =00 SR =2700 FS =00
Faulted PC = FF800348
D0:00000000 00465000 0000AAAA 00000001 00000000 5DFC8FAE CF206080 15001080
A0:4003AAAA FF810094 20000584 FF80016C FF80016C FF80036E 200007FC 20000634

Trap occured
Vector=05FMT =00 SR =2700 FS =00
Faulted PC = FF800348
D0:00000000 00465000 0000AAAA 00000001 00000000 5DFC8FAE CF206080 15001080
A0:4003AAAA FF810094 20000584 FF80016C FF80016C FF80036E 200007FC 20000634

Trap occured
Vector=05FMT =00 SR =2700 FS =00
Faulted PC = FF800348
D0:00000000 00465000 0000AAAA 00000001 00000000 5DFC8FAE CF206080 15001080
A0:4003AAAA FF810094 20000584 FF80016C FF80016C FF80036E 200007FC 20000634

Trap occured
Vector=05FMT =00 SR =2700 FS =00
Faulted PC = FF800348
D0:00000000 00465000 0000AAAA 00000001 00000000 5DFC8FAE CF206080 15001080
A0:4003AAAA FF810094 20000584 FF80016C FF80016C FF80036E 200007FC 20000634

Trap occured
Vector=05FMT =00 SR =2700 FS =00
Faulted PC = FF800348
D0:00000000 00465000 0000AAAA 00000001 00000000 5DFC8FAE CF206080 15001080
A0:4003AAAA FF810094 20000584 FF80016C FF80016C FF80036E 200007FC 20000634

Trap occured
Vector=05FMT =00 SR =2700 FS =00
Faulted PC = FF800348
D0:00000000 00465000 0000AAAA 00000001 00000000 5DFC8FAE CF206080 15001080
A0:4003AAAA FF810094 20000584 FF80016C FF80016C FF80036E 200007FC 20000634

Trap occured
Vector=05FMT =00 SR =2700 FS =00
Faulted PC = FF800348
D0:00000000 00465000 0000AAAA 00000001 00000000 5DFC8FAE CF206080 15001080
A0:4003AAAA FF810094 20000584 FF80016C FF80016C FF80036E 200007FC 20000634

Trap occured
Vector=05FMT =00 SR =2700
=============================================================================

Any ideas?

User avatar
TomNB
Posts: 230
Joined: Tue May 10, 2016 8:22 am

Re: PK70 EX NPT looping

Post by TomNB » Thu Dec 06, 2018 1:32 pm

That would explain the behavior of the link. The device is constantly resetting. If you cycle the power, do you see any messages before the trap messages occur?

tgarvin
Posts: 8
Joined: Wed Nov 21, 2018 4:53 pm

Re: PK70 EX NPT looping

Post by tgarvin » Fri Dec 07, 2018 8:16 am

No I don't. it immediately starts displaying the traps.

User avatar
TomNB
Posts: 230
Joined: Tue May 10, 2016 8:22 am

Re: PK70 EX NPT looping

Post by TomNB » Fri Dec 07, 2018 8:41 am

In that case I think you will need to contact sales and submit it as an RMA. I can't think of anything that would cause that to happen.

Post Reply