Search found 283 matches

by Forrest
Tue Aug 25, 2015 9:41 am
Forum: NetBurner Software
Topic: SB72 no longer seen in the tools
Replies: 10
Views: 8107

Re: SB72 no longer seen in the tools

First of all, a monitor recovery was probably overkill. If you loaded the factory application using FLA via MTTTY, it would have achieved what you want. If you are running the factory application and you still cannot see the device on your network, then I would assume that the network is the issue. ...
by Forrest
Fri Aug 21, 2015 9:54 am
Forum: NetBurner Software
Topic: MOD54415 RTC Month Error
Replies: 19
Views: 14158

Re: MOD54415 RTC Month Error

By the way, I've had 3 x 54415 modules in instruments on site for over 6 months now with the RTC correction "tuned" as in my previous posts, and I visited site this week to find they were all with 30s of the correct time. Two were a little fast, one was a little slow. Not bad on that drif...
by Forrest
Fri Aug 21, 2015 9:46 am
Forum: NetBurner Software
Topic: MOD54415 RTC Month Error
Replies: 19
Views: 14158

Re: MOD54415 RTC Month Error

Wow - Forest, 9 months - that simple fix took some time!! Have you all been on an extended holiday... ;) Gavin Ha! The problem was fixed, but the fix introduced a new bug that was pointed out by a user on support (which was basically the same bug as before, the month conversion between a struct tm ...
by Forrest
Fri Aug 21, 2015 9:39 am
Forum: NetBurner Software
Topic: MOD54415 RTC Month Error
Replies: 19
Views: 14158

Re: MOD54415 RTC Month Error

Dragging out this old post. Release 2.7.3 still had a problem with the MCF5441X RTC rollovers involving months. This has now been fixed. If you are using the RTC, you can confirm the issue with the attached unit testing application that will run on the device. If you need a fix now, go ahead and cre...
by Forrest
Thu Jul 30, 2015 1:58 pm
Forum: NetBurner's Eclipse IDE
Topic: Network GDB for OSX
Replies: 8
Views: 9470

Re: Network GDB for OSX

I now have network debugging working on my macbook. Unfortunately, there are some software fixes to make this work, so it's not a matter of just changing some settings. These changes will be in the next release (2.7.4), which is looking to be 4-6 weeks out. The next release will include gdb 7.9.1 on...
by Forrest
Fri Jul 10, 2015 4:29 pm
Forum: NetBurner Software
Topic: Virtual Com port works then stops
Replies: 1
Views: 2136

Re: Virtual Com port works then stops

When I set up a virtual com port, it will work for a while and then at some point it will stop receiving. What I've noticed is that when it is working, the setup app will show "Connected from 1 to 1". When it stops it shows "Connected from 0 to 1". Any idea what is going wrong? ...
by Forrest
Thu Jul 09, 2015 9:40 am
Forum: Application Notes and Design Ideas
Topic: Capturing network traffic in pcap format
Replies: 0
Views: 18105

Capturing network traffic in pcap format

So, we have some interns working on projects this summer. There job is basically described as "make cool stuff". The second project has come out of the lab and has a write up over at the NetBurner Learn Site . This project sets up your NetBurner as a packet sniffer. The netburner module wi...
by Forrest
Mon Jul 06, 2015 11:01 am
Forum: Application Notes and Design Ideas
Topic: NetBurner, Thermal Printer, and Bitcoins
Replies: 0
Views: 17305

NetBurner, Thermal Printer, and Bitcoins

So, we have some interns working on projects this summer. There job is basically described as "make cool stuff". The first project has come out of the lab and has a write up over at the NetBurner Learn Site . This is basically a bitcoin atm. With it, you can insert a coin, and a the netbur...
by Forrest
Mon Jun 22, 2015 4:04 pm
Forum: NetBurner's Eclipse IDE
Topic: Eclipse Build doesn't always compile all files
Replies: 6
Views: 8294

Re: Eclipse Build doesn't always compile all files

When I select "Build Project" from the menu, Eclipse does not always build the project. I can edit a file, save the file, then select "Build Project", and more often than not I get the message "Nothing to build". To be sure everything gets compiled, I always have to se...
by Forrest
Thu Jun 18, 2015 3:48 pm
Forum: NetBurner Software
Topic: NNDK 2.7.3 Beta release available
Replies: 0
Views: 17418

NNDK 2.7.3 Beta release available

NNDK 2.7.3 beta release is now out and available for download on the NetBurner tools download page. Please report any issues in this thread or directly to support by submitting a new ticket at http://support.netburner.com. Release 2.7.3 (June 2015) Corrections in this release EFFS Fixed FatFile.a (c...