Hi,
Thank you for the update, and I'm happy to hear it worked out. I haven't seen SPI signals go bad on any of our processors, but if somehow it was connected to anything other than 0 to 3.3V, ESD, etc it could be damaged.
Search found 541 matches
- Fri Oct 30, 2020 1:05 pm
- Forum: NetBurner Software
- Topic: MOD54415 External SD card F_ERR_NOT_FORMATTED
- Replies: 11
- Views: 6284
- Thu Oct 29, 2020 6:13 pm
- Forum: NetBurner Software
- Topic: MOD54415 External SD card F_ERR_NOT_FORMATTED
- Replies: 11
- Views: 6284
Re: MOD54415 External SD card F_ERR_NOT_FORMATTED
That app should be run with just the sd card plugged into the mod-dev-70, no card in the 54415 microSD slot
- Thu Oct 29, 2020 6:10 pm
- Forum: NetBurner Software
- Topic: MOD54415 External SD card F_ERR_NOT_FORMATTED
- Replies: 11
- Views: 6284
Re: MOD54415 External SD card F_ERR_NOT_FORMATTED
Hello,
I'm unable to reproduce the issue. Can you try the attached image file and let me know if you see any errors.
I'm unable to reproduce the issue. Can you try the attached image file and let me know if you see any errors.
- Thu Oct 29, 2020 12:27 pm
- Forum: NetBurner Software
- Topic: MOD54415 External SD card F_ERR_NOT_FORMATTED
- Replies: 11
- Views: 6284
Re: MOD54415 External SD card F_ERR_NOT_FORMATTED
Thanks for that additional information. Can you please let me know the revision number on your MOD54415?
- Mon Oct 26, 2020 8:43 am
- Forum: NetBurner Software
- Topic: TCP/IP stack trapping
- Replies: 14
- Views: 5415
Re: TCP/IP stack trapping
Did you see the previous post about the tools installation? Have you tried that yet?
- Mon Oct 26, 2020 7:55 am
- Forum: NetBurner Software
- Topic: TCP/IP stack trapping
- Replies: 14
- Views: 5415
Re: TCP/IP stack trapping
A side question: The current stack is already dual IPv4/v6. What does the stack you are trying to make do differently?
- Mon Oct 26, 2020 7:53 am
- Forum: NetBurner Software
- Topic: TCP/IP stack trapping
- Replies: 14
- Views: 5415
Re: TCP/IP stack trapping
Have you changed any of the netburner system files or default settings? If you have a brand new sb70lc, and build an unmodified netburner example, I would expect it to work. There are two possibilities that come to mind: 1. Something in the tool chain has been modified. Since you seem to be trying t...
- Thu Oct 22, 2020 9:01 am
- Forum: NetBurner Hardware
- Topic: SBL2e-200 RS485 reference design and/or what do half- and full-duplex settings do?
- Replies: 6
- Views: 3559
Re: SBL2e-200 RS485 reference design and/or what do half- and full-duplex settings do?
Yes, they come with the development kit. You also get a support account for engineering resources with the dev kit, so if you need any assistance we are happy to help.
- Thu Oct 22, 2020 7:19 am
- Forum: NetBurner Hardware
- Topic: SBL2e-200 RS485 reference design and/or what do half- and full-duplex settings do?
- Replies: 6
- Views: 3559
Re: SBL2e-200 RS485 reference design and/or what do half- and full-duplex settings do?
Hello Amarburg, The difference between the full and half is the way the RS-485 transceiver is configured and controlled. If you take a look at a traneiver data sheet, you can see the enable pins are set differently for half or full duplex. You are correct in that the RTS signal is used to control th...
- Tue Oct 20, 2020 1:24 pm
- Forum: NetBurner Software
- Topic: CreateCerts Directory missing
- Replies: 15
- Views: 5689
Re: CreateCerts Directory missing
Hello SeeCwriter, There have been many issues with the pc you are using with respect to dll's, and its not something we have ever seen before. We have a number of test machines here that are used for installation testing in which the OS is wiped and a clean install is done. So in this case I reforma...