Search found 541 matches
- Wed Jun 29, 2016 6:53 am
- Forum: NetBurner Software
- Topic: NNDK 2.5.2
- Replies: 4
- Views: 4874
Re: NNDK 2.5.2
Hi Frank, We do not have a revision that old up for download. You can request through support, or order a CD-ROM at this link: http://www.netburnerstore.com/embedded_ethernet_p/nndk-cdrom.htm Please specify the version in the comments section of the order. That said, I would agree with Paul that you...
- Tue Jun 14, 2016 2:38 pm
- Forum: NetBurner Software
- Topic: Any documentation about the Virtual COMM port driver?
- Replies: 21
- Views: 25606
Re: Any documentation about the Virtual COMM port driver?
Glad its working But no netburner device is involved?
- Tue Jun 14, 2016 12:57 pm
- Forum: NetBurner Hardware
- Topic: Configuration I/O
- Replies: 1
- Views: 6163
Re: Configuration I/O
Yes, that would be the Freescale mcf5441x data sheet:
http://www.netburner.com/mod54415/devel ... 900-1/file
Other than the irq pullups, which are there to help you avoid inadvertent irqs, the signals come direct from the processor.
http://www.netburner.com/mod54415/devel ... 900-1/file
Other than the irq pullups, which are there to help you avoid inadvertent irqs, the signals come direct from the processor.
- Mon Jun 13, 2016 10:29 am
- Forum: NetBurner Software
- Topic: Any documentation about the Virtual COMM port driver?
- Replies: 21
- Views: 25606
Re: Any documentation about the Virtual COMM port driver?
Hello, I am not sure I understand the first part of your question. The virtual comm port driver should never be used with a real hardware comm port number. Lets take the case in which you create a virtual comm port that really is virtual, and not a h/w comm port. Lets say it is comm9. You then set t...
- Wed May 25, 2016 3:15 pm
- Forum: NetBurner Software
- Topic: Using dual stack mode
- Replies: 10
- Views: 8682
Re: Using dual stack mode
Unlike IPv4 in which you specify a gateway either by dhcp or statically, in IPv6, the routers do that. So there is no analogy to an IPv4 gateway to route off network. On an IPv6 network you can set static addresses, no problem at all, an in fact all IPv6 devices will inherently have a link local add...
- Mon May 23, 2016 3:00 pm
- Forum: NetBurner Software
- Topic: Using dual stack mode
- Replies: 10
- Views: 8682
Re: Using dual stack mode
Understanding the differences between v4 and v6 is going to be a very common question for everyone. It will take some background reading, but we are attempting to put together a document to help people get started. Attached is the first iteration of a document we would like to get feedback on and im...
- Sat May 14, 2016 8:42 am
- Forum: NetBurner Hardware
- Topic: SB700EX and GPIO
- Replies: 5
- Views: 5995
Re: SB700EX and GPIO
Hello Sai Teja, We can not post confidential/copyrighted information such as NetBurner schematics and NetBurner system source code on a public forum. People posting their own source code is fine. As Paul suggested, if you can please use your account at http://support.netburner.com they can help you ...
- Fri May 13, 2016 8:42 am
- Forum: NetBurner Software
- Topic: I2C (advanced) Read Issue
- Replies: 9
- Views: 8453
Re: I2C (advanced) Read Issue
Sorry, I scrolled to the last entry and saw your code post. Didn't realize you made two separate ones. What release are you using?
- Thu May 12, 2016 4:00 pm
- Forum: NetBurner Software
- Topic: I2C (advanced) Read Issue
- Replies: 9
- Views: 8453
Re: I2C (advanced) Read Issue
Thanks Mark, but what I was really looking for was just a link to the thread so we can read the details.
- Thu May 12, 2016 3:26 pm
- Forum: NetBurner Software
- Topic: I2C (advanced) Read Issue
- Replies: 9
- Views: 8453
Re: I2C (advanced) Read Issue
Hi Mark. Can you send a link to the post you are referring to?