Search found 842 matches

by pbreed
Thu Jan 02, 2020 3:13 pm
Forum: NetBurner Software
Topic: Using IPv6 Addresses
Replies: 20
Views: 694

Re: Using IPv6 Addresses

Yes, do nothing. There is absolutely nothing wrong with using the linklocal address.... My question is why would one choose to EVER use an IPV6 address unless there is an IPV6 router on the local network? imho Any place that enforces an IPV6 only policy will have a router on their network. To start ...
by pbreed
Thu Jan 02, 2020 12:13 pm
Forum: NetBurner Software
Topic: Using IPv6 Addresses
Replies: 20
Views: 694

Re: Using IPv6 Addresses

First question why are you trying to set a static IPV6 address at all? If there is no router autoconfig will work. If there is a router you should be using the address that it assigns. While the capability to set an IPV6 static address exists, its really bad form and should probably NEVER be used. O...
by pbreed
Sat Dec 21, 2019 7:10 pm
Forum: NetBurner Software
Topic: Using IPv6 Addresses
Replies: 20
Views: 694

Re: Using IPv6 Addresses

fc00::
to
fdff::

are the IPV6 equivalent of 10.x.x.x and 192.168.x.x addresses.
They don't route, but are legal on the local subnet.
AS for prefix length just use 64.
by pbreed
Sat Dec 21, 2019 7:06 pm
Forum: NetBurner Software
Topic: Using IPv6 Addresses
Replies: 20
Views: 694

Re: Using IPv6 Addresses

The FE80:: subnet always exists. It will autoconfigure with nothing else on the network. IF there is an IPv6 router on the net it will hand out other prefixes. You can also set static addresses if you want... #include <ipv6\ipv6_interface.h> IPv6Interface * pIp6IF= IPv6Interface::GetFirst_IP6_Interf...
by pbreed
Fri Dec 20, 2019 9:39 am
Forum: NetBurner Software
Topic: Using IPv6 Addresses
Replies: 20
Views: 694

Re: Using IPv6 Addresses

Remember the IPV6 stack and the IPV4 stack are really seperate things.... First the IPv4 stack is basically unmodified. and it's configuration is different than the IPV6 stack. Whatever you were doing to configure the IPv4 stuff before keep doing, don't change anything... You should be able to cast ...
by pbreed
Thu Dec 19, 2019 2:27 pm
Forum: NetBurner Software
Topic: Using IPv6 Addresses
Replies: 20
Views: 694

Re: Using IPv6 Addresses

?What addresses are returned with UDPPacket::GetDestinationAddress() and UDPPacket::GetSourceAddress()? If it was an IPV6 packet it will return the IPV6 LL addresses. It will print as an IPv6 address. If it was an IPV4 packet it will return an address that contains the IPV4 address and the member fu...
by pbreed
Wed Dec 18, 2019 2:22 pm
Forum: NetBurner Software
Topic: Using IPv6 Addresses
Replies: 20
Views: 694

Re: Using IPv6 Addresses

The ffff:xxx.xxx.xxx.xxx IPv4 Map addresses are not supposed to be on the wire in ipv6 formatted packets, they are intended to be used as we are using them so that there is only one interface to the network stack, that is v4/v6 agnostic.
by pbreed
Wed Dec 18, 2019 2:19 pm
Forum: NetBurner Software
Topic: Compiler errors with v2.9.2
Replies: 1
Views: 107

Re: Compiler errors with v2.9.2

Yes we found that bug, its been fixed.
Submit a support request well give you the patch.
by pbreed
Wed Dec 18, 2019 2:17 pm
Forum: NetBurner Software
Topic: Using IPv6 Addresses
Replies: 20
Views: 694

Re: Using IPv6 Addresses

Not how the system is setup... We store IPV4 addresses inside an IPV6 address so you can use one type to store both address types. The netburner code then does the right thing... Even though you are using an IPV6 capable class to move IPv4 addresses around, the traffic on the wire will be ipv4. This...
by pbreed
Wed Dec 18, 2019 9:56 am
Forum: NetBurner Software
Topic: Using IPv6 Addresses
Replies: 20
Views: 694

Re: Using IPv6 Addresses

224.0.100.100

Is an IPV4 address...

nd IPV6 multicast address is anything starting with FF02.
?The tools want to turn my ipv6 ADDRESS INTO UNICODE...
Remove all the spaces.

" f f 0 2 : : 1 0 : 1 0 " would be and ipv6 multicast address....