NetBurner Community Forum

I need a way to determine the public IP address of the DSL modem my netburner device is attached to. I want to determine when the IP address assigned to my DSL (via DHCP) changes. I don't need the local address 192...., I need the public address which is of the form 75...

I was thinking of using ...

Thanks that is what I wanted

I'm writing to a TCP socket serving an HTTP request.

Can someone tell me where I find out what the error codes returned from the writeall function are? I'm using it with a socket and I sometimes get negative values (-2 and -3 specifically) returned.

The error codes should be documented in the same doc as the writeall function but they are not as far ...

Thanks for the tips. I just changed to static IP addressing to see if I have a problem other than with DHCP. If I can go for a week I will assume the problem is with DHCP and not my code.

I do not have a switch between the dsl modem/router and the mod 5270.

Hello all,

I'm using a MOD5270 module as a web server for serving up some rather large files. Things are working really well except every couple of days my web server looses its IP address. I confirm this by looking at my DSL router and seeing that it has no knowledge of the web server as an active ...

NetBurner code development usually requires a physical RS-232 connection between the development PC and the NetBurner hardware. This connection is necessary so that useful information can be displayed via the debug serial port. I found this arrangement limiting as I didn't always want to be in the ...

You guys are great. I took the approach Larry proposed by building a file called Reboot_APP.s19 with his two line content and it reboots my device right now.

Thanks to all for the help (yet again)

During code development I periodically loose control of my NB device and would to reboot it remotely (if possible). Under these conditions I can usually use autoupdate to load a new image which reboots the device upon completion giving me back control.

Is it possible to leverage this autoupdate ...