Search found 948 matches

by pbreed
Wed Jun 16, 2021 1:59 pm
Forum: NetBurner Hardware
Topic: SBL2eX Custom Packetization Anomaly
Replies: 4
Views: 34

Re: SBL2eX Custom Packetization Anomaly

Its 60msec of idle time.... So its possible that the 18 chars every 20 msec (way below the 60 msec) and the packetization you are seeing is a buffer size issue and just happens to be around 60msec. Unrelated to the 60 msec set idle time interval. If I'm correct in my guess changing the 60msec settin...
by pbreed
Sun Jun 13, 2021 7:37 pm
Forum: NetBurner Hardware
Topic: Embedded Multimedia Card
Replies: 1
Views: 24

Re: Embedded Multimedia Card

embedded mmc should be wired up and have exactly the same pins and pin definitions as an SD card.
So just follow the SD card hookup guide.
by pbreed
Tue Jun 01, 2021 9:45 am
Forum: NetBurner Software
Topic: MCAN message buffering
Replies: 1
Views: 56

Re: MCAN message buffering

CAN messages are all placed in the PrivateCanData structures. By default this is 512. From mcan.cpp: #define CAN_DATA_STORE_SIZE (512) static PrivateCanData CanDataArray[CAN_DATA_STORE_SIZE]; The OS_FIFO is a linked list internally so we stack these locally statically allocated buffers on the fifo. ...
by pbreed
Thu May 27, 2021 2:48 pm
Forum: Off-Topic
Topic: UDP Terminal suggestions
Replies: 1
Views: 46

Re: UDP Terminal suggestions

Display transmitted packets 100% works for me... It does not toggle them on off in the display, it just controls if new ones are added to the display or not. If the packets you are transmitting are broadcast or multicast in a way that the PC running udpterminal would receive them given the current u...
by pbreed
Thu May 13, 2021 9:15 am
Forum: NetBurner Hardware
Topic: SBL2e fragmented receive data
Replies: 19
Views: 736

Re: SBL2e fragmented receive data

Please let me understnad how this is connected: It this correct? Chroma Load box <RS-232> SBl2E <TCP> <What is this device?> What is the network topology between the SBL2E and whatever is connecting to it? In the final device on the end of the TCP connection, what code is running there... Have you s...
by pbreed
Sat May 08, 2021 2:40 pm
Forum: NetBurner Hardware
Topic: SBL2e fragmented receive data
Replies: 19
Views: 736

Re: SBL2e fragmented receive data

Some how when you post code on a Netburner forum one might assume unless it was explicitly stated that this is code running on a Netburner.... not on a Chrome box. I asked VERY explicitly on May 5th to send me the code running on the Netburner... Problem 1) You seem to assume that the entire message...
by pbreed
Sat May 08, 2021 6:04 am
Forum: NetBurner Hardware
Topic: SBL2e fragmented receive data
Replies: 19
Views: 736

Re: SBL2e fragmented receive data

If your running the standard SBL2E code see:
https://www.netburner.com/download/sbl2 ... rs-manual/
Section 4.6
by pbreed
Sat May 08, 2021 6:03 am
Forum: NetBurner Hardware
Topic: SBL2e fragmented receive data
Replies: 19
Views: 736

Re: SBL2e fragmented receive data

I'll try one more time... What code are you running on the NetBurner! You keep sending me the chroma code, I want to know what application you are running on the SBL2E? Are you running the standard factory app? If so please send me a picture to the configuration page? My guess is your msleep(950) IE...
by pbreed
Wed May 05, 2021 2:11 pm
Forum: NetBurner Hardware
Topic: SBL2e fragmented receive data
Replies: 19
Views: 736

Re: SBL2e fragmented receive data

Also can you determine when the entire Chroma response is done and do the TCP write as a single write?
Can you capture the TCP connection via wireshark?
by pbreed
Wed May 05, 2021 2:07 pm
Forum: NetBurner Hardware
Topic: SBL2e fragmented receive data
Replies: 19
Views: 736

Re: SBL2e fragmented receive data

Can you please provide the Netburner code your using to send the tcp data...