NetBurner Community Forum

No I don't. it immediately starts displaying the traps.

Tom. Not able to get to a prompt. It's stuck in a loop and I cannot break it.

This is what I'm seeing.

========================================================

Trap occured
Vector=05FMT =00 SR =2700 FS =00
Faulted PC = FF800348
D0:00000000 00465000 0000AAAA 00000001 00000000 5DFC8FAE CF206080 ...

Hey, Tom.

The Meraki are managed and part of my core. The Dlink and NetGear switches are dumb as a stump and are not managed.

My laptops and workstations are all set to auto-negotiate. If a DHCP server is not available, they auto assign in the APIPA range. Your device also made use of the APIPA ...

The behavior happens regardless of the device we're connecting through. I've tried Meraki layer 2 and 3, Multiple Dlink L2's and direct with a cross-over. The Dlinks are unmanaged.

The link is to a 16 sec video of the NICs behavior.

https://photos.app.goo.gl/whyELSdxS91rJsMt8

Hey there. Is there an answer to the question? "Is there a method of forcing a reset to default on the server?"

Meter shows a steady 9.4 v output from the power supply.

Hello Tom.
Thanks for the quick response.
Yes, I am using the NetBurner power supply.
The power LED comes on green and is steady.
The NIC Link light cycles on, is steady for > 1 second, rapidly flashes for about 1 second, and shuts down.
The Speed light will come on for about half of the link ...

Hey there.

Just purchased a PK70 EX NPT server as I need a local time source for my labs. In my initial config and testing, it appears that I've managed to muck up the NIC. I successfully used the IPSetup V2.5 to configure the static IP for my initial testing. The second stage was to move it into ...