NetBurner Community Forum

Currently using IDE 3.2.0. I start debugging, it loads application, but then when I try to pause the run it craps out and gives "Interrupt Failed" error.

The debug is very fussy. Not sure if it is me, my setup or the IDE.

I am using a laptop (no Ethernet port) via WiFi and the MODM7AE70 module ...

We have determined why the processor halted, it appears that some unknown action occurred because an illegal EBI register value...

The nrd_pulse value was loaded with 65, but the nrd_cycle value was left at 90. The 90 cycle time was much smaller than the setup and pulse time. Processor did not like ...

Using the memory example, writing to memory works but for some reason when reading from memory it causes a SIGILL:illegal instruction.... what is odd is that CS0, CS2, and CS3 will cause the illegal instruction. CS1 reading will not cause a the fault.

EBIdata = ebi_1_base[8666];
ebi_2_base[6146 ...

Anyone have a code example for accessing external memory on the MODM7AE70 board?

Setting up the chip selects, wait states , etc...

I have no problem with an andriod phone with Chrome accessing a FTP server on the netburner.

With the iphone Chrome just wants to search for "ftp://192.168.1.113".

With iphone Safari, the "ftp://192.168.1.113" displays the files, but not the directories...

Anyone have a suggestion to get the ...