Search found 457 matches

by TomNB
Sat Jun 18, 2022 11:49 am
Forum: NetBurner Software
Topic: Setting Timezone Seems Broken
Replies: 3
Views: 88

Re: Setting Timezone Seems Broken

Hello, I'm not an expert in the time zone area, but I'll give it try until someone else can join in. Most OS's have a tzset() function. In 2.9.x we have a tzsetchar() function. For example, tzsetchar((char*)"EST5EDT4,M3.2.0/01:00:00,M11.1.0/02:00:00"); for eastern time. There are two examples that m...
by TomNB
Thu Jun 16, 2022 8:32 am
Forum: NetBurner Software
Topic: Netburner MQTT PAHO Library - publish size limit
Replies: 2
Views: 92

Re: Netburner MQTT PAHO Library - publish size limit

Thank you for posting the follow up. I'm sure it will.
by TomNB
Tue Jun 14, 2022 2:19 pm
Forum: NetBurner's Eclipse IDE
Topic: Migrating from 2.8.6 to 3.3.7 issues
Replies: 1
Views: 80

Re: Migrating from 2.8.6 to 3.3.7 issues

Yes. While it was normal in the early 2000''s to use BYTE, WORD, DWORD, as of 10 years ago so so standard practice is to use "int_" or "uint_" for example uint8_t, uint16_t, uint32_t
by TomNB
Tue May 10, 2022 1:33 pm
Forum: NetBurner Hardware
Topic: SBL2e Ethernet to 8 TTL OUTPUTS
Replies: 3
Views: 208

Re: SBL2e Ethernet to 8 TTL OUTPUTS

I would recommend checking the manual as well: https://www.netburner.com/download/sbl2 ... rs-manual/
by TomNB
Tue May 10, 2022 1:32 pm
Forum: NetBurner Hardware
Topic: SBL2e Ethernet to 8 TTL OUTPUTS
Replies: 3
Views: 208

Re: SBL2e Ethernet to 8 TTL OUTPUTS

Hello,

What electrical specs do you need to meet? Voltage, source/sink current amount?
At what speed do you need to switch the outputs?

The SBL2e can do what you ask without programming at 3.3V. Either through the web server or a tcp connection.
by TomNB
Thu Apr 21, 2022 5:19 pm
Forum: NetBurner's Eclipse IDE
Topic: GDB fails with "joined drive" error
Replies: 5
Views: 2223

Re: GDB fails with "joined drive" error

Hello, Can you answer the questions from the previous post? What is the IP address and mask of both the PC and SB70LC? If find cannot locate the device it could be because: - You are using a virtual machine and the routing will not work - You have a firewall or antivirus blocking the pacets - You ha...
by TomNB
Thu Apr 21, 2022 5:17 pm
Forum: NetBurner's Eclipse IDE
Topic: Unable to connect in debug mode
Replies: 4
Views: 1264

Re: Unable to connect in debug mode

Hello, Can you answer the questions from the previous post? What is the IP address and mask of both the PC and SB70LC? If find cannot locate the device it could be because: - You are using a virtual machine and the routing will not work - You have a firewall or antivirus blocking the pacets - You ha...
by TomNB
Thu Mar 10, 2022 11:46 am
Forum: NetBurner Software
Topic: EthernetIP not declared
Replies: 4
Views: 504

Re: EthernetIP not declared

SeeCwriter is correct. The ShowInterfaces example is a good one to see how you can handle IP address information.
by TomNB
Thu Feb 24, 2022 12:06 pm
Forum: NetBurner Software
Topic: Bootup output
Replies: 2
Views: 421

Re: Bootup output

The SB800EX, NANO54415 and MOD5441x products have an 2.x compatible alternate boot monitor, and that is where the first message is coming from. The second is from the 3.x boot sequence. If you abort when the first message appears, type "setup" and select "quiet boot" the message will no longer appear.
by TomNB
Fri Feb 11, 2022 8:42 am
Forum: NetBurner Hardware
Topic: Can't get to work with SBL2e
Replies: 6
Views: 1121

Re: Can't get to work with SBL2e

Do you have serial communication with that SBL2e? You can do it through the boot monitor serial interface, use an 'A' to abort the application boot.

Or, you might be able to change your pc's network settings. What settings did you set the SBL2e to?