Search found 35 matches

by BBAdmin
Wed Jul 08, 2015 4:23 pm
Forum: Application Notes and Design Ideas
Topic: New example: 5441x timers, pulse generator and counter
Replies: 0
Views: 17707

New example: 5441x timers, pulse generator and counter

Hello, We have added a new example that uses one dma timer to generate pulses, and a second timer to calculate the frequency of if the pulses. The timer capture input can be configured to capture on rising edge, falling edge, or both. In this case we capture on each rising edge. The debug serial por...
by BBAdmin
Mon Jun 15, 2015 10:04 am
Forum: Off-Topic
Topic: modification to be done in setpinIRQ()
Replies: 1
Views: 5100

Re: modification to be done in setpinIRQ()

Hello, The reason is that level 7 is a special case - it in an unmaskable interrupt, and as such you cannot call any rtos functions, among other things. You also need to ensure, as the developer, that you can service they quickly enough. Your version is quite a few back, so I have attached the examp...
by BBAdmin
Sat Jan 31, 2015 10:42 am
Forum: NetBurner's Eclipse IDE
Topic: NNDK Update; Serial Numbers
Replies: 6
Views: 7067

Re: NNDK Update; Serial Numbers

You should always be able to log into your support account to view serial numbers and past support tickets. So your MOD5270 and SB70LC serial numbers should be there. If for some reason you cannot find them please contact sales@netburner.com. The only support charges are for getting new releases, an...
by BBAdmin
Thu Dec 05, 2013 10:18 am
Forum: NetBurner Hardware
Topic: CB34EX S2E Webpage Config Issue
Replies: 1
Views: 2671

Re: CB34EX S2E Webpage Config Issue

It sounds like you have an older unit. The new features are part of a recently released application. You can use autoupdate to load in the new application. Contact sales or support for the image.
by BBAdmin
Thu Jun 06, 2013 3:15 pm
Forum: NetBurner Software
Topic: pinconstant.h and pins.cpp for SB72?
Replies: 1
Views: 1793

Re: pinconstant.h and pins.cpp for SB72?

Hello, The SB72 was created quit a bit earlier than the MOD5234 and also before the pins class software feature was in existance. There is an application note on the SB72 product page: General Purpose I/O for the SB72 Platform. That app note will tell you which pins can be used and how to control th...
by BBAdmin
Fri Dec 14, 2012 1:32 pm
Forum: Application Notes and Design Ideas
Topic: MOD54415 External IRQ example
Replies: 3
Views: 9396

MOD54415 External IRQ example

Example using external interrupt request pins.
by BBAdmin
Fri Dec 14, 2012 1:30 pm
Forum: Application Notes and Design Ideas
Topic: MOD54415 DAC example
Replies: 8
Views: 16317

MOD54415 DAC example

This example demonstrates simple DAC output capability and the advanced waveform output capability. Tested with tools release 2.6.
by BBAdmin
Thu Oct 18, 2012 1:53 pm
Forum: Off-Topic
Topic: Looking for Netburner programmer in UK
Replies: 1
Views: 2849

Re: Looking for Netburner programmer in UK

Hi Dave,

We have a list of consultants on our web site:
http://www.netburner.com/company/netbur ... tants.html.

No one on the list is in the UK at the moment. But if there is someone there that has worked on at least 2 NetBurner based products we would be happy to talk with them.
by BBAdmin
Tue Sep 25, 2012 4:35 pm
Forum: NetBurner Hardware
Topic: Wifi
Replies: 6
Views: 4195

Re: Wifi

Hi Scott,

Thank you for your understanding. We have prototype h/w that is working, but the s/w is the most difficult part. As long as 6 months is a possibility.
by BBAdmin
Tue Sep 25, 2012 3:48 pm
Forum: NetBurner Hardware
Topic: Wifi
Replies: 6
Views: 4195

Re: Wifi

Hello sblair, We are actively working on a wifi solution as our highest priority. We have thusfar gone through 2 venddor's chipsets only to discover midway through development that they did not function as promised. Things like excessive packet loss, low performance, inability to scan while connecte...