NetBurner Community Forum

It's a Linksys 10/100Mb 24-port unmanaged switch. I swapped it out with a Netgear switch and the problem went away. The Linksys switch worked fine with the rest of the gear in my shop (a few computers and a bunch of Rabbit micro's running motors), but it didn't play well with the Netburner module.

FYI, it looks like an incompatibility with my network switch. Swapping the switch out cured the issue with the Netburner module. Now programs are burned in <5 seconds and web pages are served from the module instantly. Life is good.

Thanks for confirming that this is abnormal, I'll try emailing tech support directly.

I believe so, but perhaps I'm missing something. The board is currently configured for DHCP, and I set the Subnet Mask to 255.255.255.0. I have also tried using static IP addresses with no benefit. Programming the board and viewing the factory sample through a browser both work, but it is extremely ...

I just started playing with my MOD5270 development kit. Working through some of the "Getting Started" manual, I tried importing the FactoryDemo and then downloading it onto the module. I was surprised to see that it takes about 4 minutes to program the device. Furthermore, when viewing pag...