Search found 480 matches

by SeeCwriter
Thu Oct 14, 2021 9:35 am
Forum: NetBurner Software
Topic: HttpsUploadCert example
Replies: 7
Views: 186

Re: HttpsUploadCert example

Great. Thank you.
by SeeCwriter
Tue Oct 12, 2021 2:55 pm
Forum: NetBurner Software
Topic: HttpsUploadCert example
Replies: 7
Views: 186

Re: HttpsUploadCert example

The problem was that file makeancert must have a .cnf for a file extension in order get an alternate name. Now I can make a secure connection. Also, I just noticed that the cert & key uploaded to the module don't appear to be saved in non-volatile memory because after every reboot I have to upload t...
by SeeCwriter
Tue Oct 12, 2021 2:27 pm
Forum: NetBurner Software
Topic: HttpsUploadCert example
Replies: 7
Views: 186

Re: HttpsUploadCert example

Looking at the certificate in the browser, it doesn't show an alternate name. This is the contents of file makeancert.ext: #If you have an IP use: subjectAltName = 10.250.5.143 #otherwise use #subjectAltName = DNS:yourname And this is the commandline in makerserver.bat that is used: openssl x509 -re...
by SeeCwriter
Tue Oct 12, 2021 1:15 pm
Forum: NetBurner Software
Topic: HttpsUploadCert example
Replies: 7
Views: 186

Re: HttpsUploadCert example

No, I can't click past the error. I can go back to unsecure connection, port 80, but nothing on port 443. The certificate displayed when clicking the "Display public key" matches the server.crt file I uploaded to the module. I created new certificates with the alternate name per the instructions in ...
by SeeCwriter
Tue Oct 12, 2021 9:26 am
Forum: NetBurner Software
Topic: WolfSSL Warning
Replies: 1
Views: 34

WolfSSL Warning

One of the many warnings in the Wolf source code, is in NbWoldSsl.cpp, line 991: C:/nburn/libraries/crypto/NetBurner/NbWolfSsl.cpp:991:44: warning: unsigned conversion from 'int' to 'uint8_t' {aka 'unsigned char'} changes value from '1000' to '232' [-Woverflow] gSslQueue.Init(&(gSslQueueStorage[0]),...
by SeeCwriter
Mon Oct 11, 2021 10:56 am
Forum: NetBurner Software
Topic: HttpsUploadCert example
Replies: 7
Views: 186

HttpsUploadCert example

Using v3.3.3, I built the HttpsUploadCert example and loaded into a NANO. According to the example description, it has a cert & key compiled in so that a secure connection can be made before a cert & key are uploaded. Trying to make a secure connection with Chrome, it generates error "NET::ERR_CERT_...
by SeeCwriter
Tue Oct 05, 2021 3:06 pm
Forum: NetBurner Hardware
Topic: Converting to v3.x tools
Replies: 17
Views: 403

Re: Converting to v3.x tools

When I use nbupdate to load the test.bin file you sent, I get the following output in MTTTY: Header Checksum good Loading 271067 Download Complete... Programming complete reboot in 5 sec Waiting 2sec to start 'A' to abort Then nothing happens. It just sits and the Waiting message. All those messages...
by SeeCwriter
Tue Oct 05, 2021 1:51 pm
Forum: NetBurner Hardware
Topic: Converting to v3.x tools
Replies: 17
Views: 403

Re: Converting to v3.x tools

I'll try it, but I read the size wrong. It's 260k bytes.
by SeeCwriter
Tue Oct 05, 2021 11:48 am
Forum: NetBurner Hardware
Topic: Converting to v3.x tools
Replies: 17
Views: 403

Re: Converting to v3.x tools

Yes, there is a test.bin file. Size is 260-bytes.
by SeeCwriter
Tue Oct 05, 2021 10:10 am
Forum: NetBurner Hardware
Topic: Converting to v3.x tools
Replies: 17
Views: 403

Re: Converting to v3.x tools

Your doc link is the page I have been using. And no, there was no .bin file created when the app was built by Eclipse, only .s19, .elf, and .map files.